Vicker Hardness Tester Machine TV-50 / TV-250

vickers

Features :

  • Table Top sturdy Model
  • Front projection screen with Micrometer with Optical system List Count of 0.0005 mm
  • Motorised Loading & Unloading of Loads
  • Load selection By Indexible Load Selection Knob
  • Very wide testing range from very soft Metals to Very Hard Metals
  • Models with minimum 1 Kg Load are available
  • The illumination light goes off during the application of Load which reduces the operator's fatigue due to continuous light illumination as well as increases Bulb life
  • State of Art Load Damping system for a very smooth & Jerk free Loading & unloading of applied Load
  • Machine Confirms to IS: 1754-2002 for Vickers & IS: 2281-2005 / BS240 for Brinell.
  • Four model are available :
  1. TV-50 With Loads 5 to 50 Kgf
  2. TV-250 With loads 5 to 250 Kgf
  3. TV-50 (SPL.) With Loads 1 to 50 Kgf
  4. TV250 (SPL.) With loads 1 to 250 Kgf

vickers

Technical Specification :

Sr.No Description TV-50 TV-50 (SPL) TV-250 TV-250 (SPL.)
1 Loads (Kgf.) 5, 10, 20,30 & 50 1, 5, 10, 20 ,30 & 50 5, 10, 20 ,30, 50 for Vickers
62.5, 187.5, 250 for Brinell 		1, 5, 10, 20 ,30, 50 for Vickers
62.5, 187.5, 250 for Brinell
2 Maximum Test height (mm) 200 mm 200 mm 200 mm 200 mm
3 Depth of throat (mm) 150 mm 150 mm 150 mm 150 mm
4 Weight Approx. (Kgf) 180 180 180 180
5 Dimension L x W x H mm 660x180x850 mm 660 x 250 x 850 mm 660 x 250 x 850 mm 660 x 250 x 850 mm
6 Connected load 0.1 KVA, 1 Phase AC, 220V, 50 Hz

Standard Accessories :

Sr.No Item Description TV-50 TV-50 (SPL) TV-250 TV-250 (SPL.)
1 Flat Table of 100mm Dia 1 No. 1 No. 1 No. 1 No.
2 Vee Table for Specimen- 6 to 80 mm Dia 1 No. 1 No. 1 No. 1 No.
3 Vickers Diamond Indenter 1 No. 1 No. 1 No. 1 No.
4 Ø2.5, 5mm Ball Indenter -- -- 1 No. each 1 No. each
5 Ø2.5, 5mm Steel Balls -- -- 5 No. each 5 No. each
6 Vickers test block 1 No. 1 No. 1 No. 1 No.
7 Brinell test block -- -- 1 No. 1 No.
8 Electrical Cord 1 No. 1 No. 1 No. 1 No.
9 Instruction Manual 1 No. 1 No. 1 No. 1 No.

FMI Reserves the rights of change in above specification due to constant improvement in design.